The AEROCOM Advantage

Aerocom offer engineered solutions that address specific flexible piping challenges such as vibration, thermal, or pressure related applications involving the transfer of liquids or gases. The hose and fittings included in this catalogue are precisely manufactured and coupled to assure unequalled quality and immediate response to
your needs. Rapid quotation and delivery response to even the most difficult applications are our specialties. We stock and supply standard medium pressure, ultra high pressure, convoluted, smooth-bore, rubber-covered, and
large bore hoses of PTFE with their associated fittings, adapters and accessories.

The PTFE Advantage

Chemical Resistance – Inert to practically all commercial chemicals, acids, alcohols, coolants, elastomers, petroleum compounds, solvents, vinyls, synthetic lubricants & hydraulic fluids.
Flex & Shock Resistance – Not affected by continuous flexing, vibration, or impulse – withstands alternating cold and heat cycling.
High Flow Rates – Low coefficient of friction with anti-stick properties insures continuous lower pressure drops during service with a good pressure rating and full vacuum.
Light Weight – Easier to move, handle and install than rubber hose with a comparable burst pressure rating – ideal as pigtail in gas handling and pneumatic systems where dew point must be low.
Non Adhesive – Handles substances such as: adhesives, ashphalt, dyes, grease, glue, latex, lacquers, and paints – no carbon build up when used as a compression discharge line.
Non Contaminating – Will not contaminate material, fluid, gas conducted – PTFE is FDA approved for food handling and pharmaceutical applications
Resists Deterioration – Impervious to weather and can be stored for long periods without aging – will not age during service.
Steam Compatibility – Absorbs no moisture – rated for steam to 240 ºC (460 ºF) – has low volumetric expansion characteristics – easy to clean and sterilize.

ATSB14

AEROCOM SERIES: ATSB14

Construction – Aerocom smooth bore hose is constructed of an extruded inner-core of virgin PTFE or carbon black dissipative PTFE with type 304 stainless steel wire braid reinforcement.
The braid retains pressure and acts as a protective covering. Aeroco m smooth bore hose is found in many of the toughest service applications, handling corrosive fluids such as acids,
solvents, fuels, all types.

Applications
  • High Temperature Hydraulic/Air Applications
  • Chemical & Acid Transfer
  • Steam Lines / Tire Presses
  • Pharmaceuticals
  • Food Products
  • Pulp & Paper
  • Glass Manufacturing
  • Fuel Lubricant
  • Waste Water or Slurry
Benefits
  • High working and burst pressures
  • Most economical of all hoses with PTFE
  • The low-friction surface of smooth bore hose provides for high flow rates
  • Easily drained and/or cleaned
  • Temperature Rating: -65 F (-54 C) to +450 F (+230 C)

 

ATSBR-ATSBRB

SERIES C14

FITTINGS FOR AEROCOM ATSB14 PTFE HOSE
Aerocom medium pressure smooth bore hose ends can be swaged or crimped. Certified assemblers have the option of using their existing tooling or deploying the Aerocom “C14” tooling technology which will allow them the versatility to attach to both 0.30” and .040” wall PTFE hose types with ease.

FEATURES
  • Easy to use 1 PC fitting and collar design
  • Swage or crimp attachment
  • Can be attached to both .030” and .040” wall PTFE hose with stainless steel braided exterior
  • “Back-up” hex on female JIC couplings for ease of tightening
  • Aerocom easy to use C14 tooling technology for quick fitting to hose assembly.
  • Availability of custom fittings manufactured to your specifications
MATERIALS
  • 300 Series stainless steel
  • Brass
  • Carbon steel

ATSB14

AEROCOM SERIES: ATSB5

Construction – Aerocom ultra high pressure 5000 psi hose is constructed of an extruded inner-core of carbon black static dissipative PTFE with a multitude of type 304 stainless wire braid reinforcement when braided together, form a single braid of protection. The post-sintered tube increases its density, reducing effusion in pneumatic applications.

Applications
  • High Temperature Hydraulics
  • High Pressure Chemical Transfer
  • Two Part Epoxy (RIMM)
  • Hot Melt Glue (Boxes & Packaging)
  • High Pressure Gas (Pigtail)
  • Life Support System
  • Oil Field Applications
  • Urethane Transfer Applications
Benefits
  • Extreme high pressure hose
  • Smooth bore improves flow rates
  • Resists kinking in service
  • High durability and unlimited shelf life
  • Sizes up to 1-1/2” I.D
  • Tight bend radius
  • Meets requirements of SAE 100R8 / 100R9
  • Temperature Rating: -65 F (-54 C) to +400 F (+204 C)

ATSB6

AEROCOM SERIES : ATSB6

Construction- Aerocom ultra high pressure 6000 psi hose is constructed of an extruded inner-core of carbon black static dissipative PTFE with layers of spiral wrap between two layers of type 304 stainless wire braid reinforcement which makes this hose the premiere in extremely high pressure applications. The post-sintered tube increases its density, reducing effusion in pneumatic applications.

Applications
  • High Temperature Hydraulics
  • High Pressure Phosphate Ester Apps
  • High Pressure Chemical Transfer
  • Two Part Epoxy (RIMM)
  • Hot Melt Glue (Boxes & Packaging)
  • High Pressure Gas (Pigtail)
  • Life Support System
  • Oil Field Applications
  • Urethane Transfer Applications
  • High Temperature Heated Hose Apps
Benefits
  • Extreme high pressure hose
  • Smooth bore improves flow rates
  • Resists kinking in service
  • Unlimited shelf life
  • Suitable for impulse service
  • Meets requirements of SAE 100R8 / 100R9
  • Temperature Rating: -65 F (-54 C) to +400 F (+204 C)

ATC-ATCB

AEROCOM SERIES ATC/ATCB

Construction: Aerocom super flexible convoluted PTFE hose series ATC has a white, non-conductive PTFE liner, externally reinforced with PTFE impregnated fibreglass in a single stainless steel wire braid. The ATCB series has a PTFE inner core with a precisely controlled amount of carbon black added to provide a continuos conductive path to metal end fittings to bleed off static electricity

Applications
  • Chemical Transfer
  • Acid Transfer
  • Tire Mold Equipment
  • Purified Water
  • Reverse Osmosis Systems
  • Fill Lines
  • Air Compressors
  • Waste Water & Slurry
Benefits
  • Very flexible, requiring very little force to deflect
  • Tightest or smallest bend radius
  • High working pressures
  • Light weight per foot
  • Full vacuum rating available
  • Temperature Rating: -65 F (-54 C) to +400 F (+230 C)

ATCP-ATCPB

AEROCOM SERIES: ATCP/ATCPB

Construction- Aerocom convoluted PTFE hose with polypropylene braid is a super flexible product designed for use where hose flexibility is required but stainless steel braid is unsuitable. The ATCP series is constructed with white PTFE helical, convoluted tubing reinforced with polypropylene over braid. Series ATCPB has black conductive inner core designed to dissapate electrostatic charges.

Applications
  • Exotic Chemical transfer
  • Metering or weighing applications
  • Soda bottle filling
  • Application requiring frequent handling
  • Potable water
  • Applications with exposure to salt water
  • Applications requiring high flexibility
Benefits
  • User-friendly braid
  • Braid is compatible with chlorinated solvents and salt water
  • Will not conduct electricity
  • Light weight per foot
  • Very flexible, requiring very little force to deflect
  • Polypropylene braid compatible with chemicals which attack stainless steel
  • Temperature Rating:-65 F (-54 C) to +250 F (+120 C)

 

ATSBR-ATSBRB

SERIES SK11

FITTINGS FOR AEROCOM “SUPERFLEX ATC/ATCB AND ATCP/ATCPB” CONVOLUTED HOSE.
ALSO DESIGNED TO BE ATTACHED TO AEROCOM “ELASTO-CHEM ATSBR/ATSBRB” RUBBER COVERED PTFE SMOOTHBORE HOSE.

FEATURES
  • 2 piece insert and collar design allows you to use carbon steel collars when only the wetted insert requires corrosion resistant SS316 material
  • Swage or crimp attachment
  • “Back-up hex on female JIC couplings for ease of tightening
  • Aerocom easy to use SK11 tooling technology for quick fitting to hose assembly.
  • Availability of custom fittings manufactured to your specifications
MATERIALS
  • 316 Series stainless steel inserts with 304 stainless steel collars
  • Carbon Steel

ATSBR-ATSBRB

AEROCOM SERIES: ATSBR/ATSBRB

Construction – Aerocom EPDM rubber covered PTFE smooth bore hose has been engineered for lasting service in the most demanding applications. Elasto-Chem starts with a smooth, non-stick FDA approved material made of white or black conductive PTFE. Two plies of synthetic rubber reinforced with horizontal fabric braid are permanently bonded to the PTFE tube. A double steel wire helix is included to support the shape in full vacuum service applications and to prevent kinking. This provides a double grounding path for any build up of electrical charge. The entire hose is protected by an abrasion resistant rubber cover that will not fade or discolour with age and is also weather resistant.

Applications
  • Chemical Transfer
  • Acid Transfer
  • Pharmaceutical Manufacturing
  • Photo Emulsions
  • Food Processing
  • Large Diameter Smooth Bore
  • Tank Truck
  • Slurry or Waste
Benefits
  • Smooth bore up to 4” I.D
  • Less turbulence created by smooth bore provides better flow rates
  • Thermal insulation
  • Easily drained/steam cleanable
  • Feel of a rubber hose versus handling braided wire
  • Rated up to 550 PSI working pressure
  • Temperature Rating: -40 F (-40 C) to +250 F (+120 C)

Accessoires for the PTFE Hose

 


ATSBR-ATSBRB

AEROCOM SPECIALTY FITTINGS FOR PTFE HOSE

ATSBR-ATSBRB

Adapters

ATSBR-ATSBRB

Protective Hose Coverings